Azbil ACTIVAL+ FVY5130J Specifications & Instructions

Also see for ACTIVAL FVY5130J: Specifications & instructions

Azbil ACTIVAL+ FVY5130J Specifications & Instructions Manual pdf 1 page image

AB-7042© 2011-2020 Azbil Corporation. All Rights Reserved.1Specifications/InstructionsStandalone Model(JIS 10K / FC200) GeneralACTIVAL +, Model FVY5130J/FVY5140J/FVY5150J, is a series ofmotorized two-way valves with flanged-end connection. DN15 toDN80 rotary valve and actuator are integrated in a single unit.In combination with the functions of a control valve, ModelFVY5130J/FVY5140J/FVY5150J measures and controls flow. ModelFVY5130J/FVY5140J/FVY5150J thus enables to control temperaturefor air conditioning by controlling chilled/hot water volume and tomeasure chilled/hot water flow.For such a high functionality, compact size and simple installation ofModel FVY5130J/FVY5140J/FVY5150J are incomparable.3 kinds of control signals are available to operate the ModelFVY5130J/FVY5140J/FVY5150J.- 4-20 mA DC input:Provides proportional control in combination with a DDC controller.(e.g., Infilex GC Model WY5111, Model R35/R36)- 2-10 V DC input:Provides proportional control in combination with a DDC controller.(e.g., Infilex AC Model WY5117)- 0-10 V DC input:Provides proportional control in combination with a DDC controller.Flow data stored in the Model FVY5130J/FVY5140J/FVY5150J isretrieved via RS-485 communication (Modbus protocol). The retrievedflow data is effective for energy-saving facility operation.Notes JIS: Japanese Industrial Standards  DDC: Direct Digital Control Features Compact and lightweight:Rotary valve actualizes small body and light weight. Valve and actuator integrated in a single unit. Model FVY5130J/FVY5140J/FVY5150J holds flow dataeffective for maintenance and energy-saving facilityoperation. The data is retrieved via RS-485communication (Modbus protocol). Valve for chilled/hot water control applicable to large Cvvalue, high rangeability, and low leakage. Durable actuator with low power consumption. Flow control/position control operation selectable:For flow control, flow characteristic is selectable (equalpercentage or linear). For position control, flowcharacteristic is equal percentage. In combination with Display Panel (ModelQY5010S1000) and the insertion-type pipe temperaturesensor (Model TY7830) or the temperature sensor forpipe surface (Model TY7820), pressure, temperature,and flow can be displayed on the Display Panel.IMPORTANT:Do not use the data measured by Model FVY5130J/FVY5140J/FVY5150J for charging or dealing purposes.