Menu
Azatel AzaCall200 Administrator's Manual
                                                                                                                              | |
Contents
| 
59Administrator Guide – AzaCall200 VOIP Multi-Protocol Gateway5.14.12.2. Feature Configuration StepsCall features for VOIP gateway device include Call Waiting, Call Forwarding, etc. After makingthe setting changes, click OK then Save Configuration and Reboot for the new settings to takeeffect.Figure 51 VOIP Call Feature Configuration WindowItem DescriptionPort Index Indicate which of the 2 available user ports will have the selected featuresapplied to.Call Hold Enable or disable the feature to place a call on hold.Call Waiting Enable or Disable Call Waiting feature.Call Transfer Enable or disable the Call Transfer with Consultation or Call Transferwithout Consultation features; specify the digits to dial on the keypad foractivation of these features.General FeatureCodeA caller initiating a hook flash while in the middle of a 2-way conversationcan take an incoming call from, or transfer the current call to, a 3 rd person.As the caller does this, he may use the configured disconnect code todisconnect the call with the party in the original 2-way conversation.Call Forwarding Enable or Disable Call forwarding feature. Three separate call forwardingfeatures may be enabled or disabled:1. Call Forwarding Always forwards all incoming calls to designatedforwarding number.2. Call Forwarding Busy forwards an incoming call when the callednumber is busy.3. Call Forwarding No-Answer forwards an incoming call after the callednumber has rung the specified number of times without beinganswered.DND (Do NotDisturb)Enable or disable the Do Not Disturb feature. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved