2Administrator Guide – AzaCall200 VOIP Multi-Protocol Gateway2.2.2. Getting Connected1. LINE Port:Plug one end of the RJ-11 telephone line into the LINE port and plug the other endinto the phone socket in the wall using an RJ-11 telephone line.2. PHONE Port:Plug one end of the RJ-11 telephone line into the PHONE port and plug the other endinto the phone socket of a telephone set.3. PWR Port:Plug one end of the power adapter into the PWR port and plug the other end into anelectric outlet in the wall.WarningUse only the enclosed power adapter accompanying the gateway device. Faulty orimproper voltage input may cause permanent damage to the power supply and thegateway device thereby voiding the warranty.4. ENET Port:Plug one end of the RJ-45 Ethernet cable into the ENET port and plug the other endinto the Ethernet socket of the Network Interface Card (NIC) in the user’s PC.
