Axxess AXGMLN-01 Installation Instructions Manual

Axxess AXGMLN-01 Installation Instructions Manual Manual pdf 1 page image

Installation instructions for part AXGMLN-01REV. 1/21/2020 INSTAXGMLN-01axxessinterfaces.com • metraonline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATIONAxxess IntegrateCAUTION! All accessories, switches, climate controls panels, andespecially air bag indicator lights must be connected before cyclingthe ignition. Also, do not remove the factory radio with the key in theon position, or while the vehicle is running.• Provides accessory power (12-volt 10-amp)• Retains R.A.P. (retained accessory power)• Provides NAV outputs (parking brake,reverse, speed sense)• Pre-wired AXSWC harness (AXSWC soldseparately)• Retains chimes to the factory speaker• Adjustable chime level• Retains OnStar / OE Bluetooth• Adjustable OnStar level• Retains the factory backup camera• Designed for non-amplified models, orwhen bypassing a factory amp• Retains balance and fade• Includes an antenna adapter• AXUSB-CBL updatable (sold separately)INTERFACE FEATURES• Wire cutter • Crimp tool • Solder gun • Tape• Connectors (example: butt-connectors, bell caps, etc.)• Small flat-blade screwdriverTOOLS REQUIREDAXGMLN-01GM Data Interface2006-Up• AXGMLN-01 interface • AXGMLN-01 harness• 16-pin harness with stripped leads • Backup camera harness • Antenna adapterINTERFACE COMPONENTSConnections to be made ................................................2-3Installing the AXGMLN-01 ................................................ 3Initializing the AXGMLN-01 .............................................. 3Adjusting the AXGMLN-01 ................................................ 4Table of ContentsAPPLICATIONSSee inside front cover