Menu
Asus samplepad pro User Manual
                                            | |
7To adjust the Mode of the pad or ext. trigger:1. Strike a pad or ext. trigger.2. Move the cursor to the MODE area by pressing the Cursor Up or Cursor Down buttons.3. Then press the Cursor Left or Cursor Right buttons to select the mode.Select from the following mode options:• POLY (Polyphonic)Each new pad or ext. trigger strike will trigger the assigned sample and overlap the sound from theprevious strike of the same trigger location.• MONO (Monophonic)Each new pad or ext. trigger strike will trigger the assigned sample and stop the sound from the previousstrike of the same trigger location.• LOOPAfter a pad or ext. trigger is struck, the sample will continue to playback from the beginning after it reachesthe end of the sample. To stop the loop, strike the pad or ext. trigger again.• STOPAfter the pad or ext. trigger is struck, all samples currently being played by SamplePad Pro will be muted.• TMPStrike the pad or ext. trigger several times in the TMP mode to set the tempo of the metronome.• CLKStrike the pad or ext. trigger to start or stop the metronome (click) playback.• HATWhen a pad or ext. trigger is in HAT mode, striking this pad or ext. trigger will trigger one of the sampleassigned to the 5 hi-hat locations of each kit (HAT OPE, HAT MID, HAT CLO, HAT CHK, HAT SPL). Theposition of the hi-hat pedal (sold separately) will determine which of the 5 currently assigned hi-hatsamples of the kit will trigger.Mute GroupsNormally, when you strike a pad or ext. trigger when another pad is playing back, the samples of these two pads willbe played back overlapped. With the mute group function, you can stop the playback of the sample of a pad whenyou strike another pad or ext. trigger. For example, you can simulate a hi-hat by setting an open hi-hat sound to onepad, and then setting a closed hi-hat sound to another pad. Then after setting both pads to the same mute group,these sounds will mute each other out, similar to a real hi-hat.To assign a pad or ext. trigger to a mute group:1. Strike one of the pads or ext. triggers that you want to assign to a Mute Group.2. Move the cursor to the MGRP (Mute Group) area by pressing the Cursor Up or Cursor Down buttons and usethe Cursor Left or Cursor Right buttons to select a Mute group. [1-16]3. Strike another pad or ext. trigger, navigate to the MGRP, and use the Cursor Left or Cursor Right buttons toset this pad to the same number you set for the first pad.Options MenuSamplePad Pro’s Options menu contains global settings that affect theoverall operation as well as system-related information and functions.To enter the Options menu and change these global settings:1. Press and hold the Cursor Up and Cursor Left buttons for 2seconds to enter the main Options menu.2. Press the Cursor Up and Cursor Down buttons to highlight thesubmenu that you would like to enter, then press Cursor Rightto enter the submenu.3. Press Cursor Up and Cursor Down to highlight the parameter that you would like to enter, then press CursorLeft and Cursor Right to edit the parameter.4. To exit a submenu or the main Options menu, press and hold Cursor Up and Cursor Left for 2 seconds. |
Related manuals for Asus samplepad pro
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved