Asus ZenWiFi XD4 Plus Quick Start Manual

Also see for ZenWiFi XD4 Plus: Quick start guide User guide

ASUS ZenWiFi XD4 PlusAX1800 Dual Band WiFi RouterModel: XD4 PlusQuickStart Guide1 Plug the adapter into the DCIN port.2 The power LED will light up when your hardware is ready.Hardware ExplanationsXD4 Plus OverviewWAN/LAN portConnect your modem to this portwith a network cable.LAN portConnect your PC to a LAN portwith a network cable.Before SetupASUS Router AppAiMesh Setup StepsTroubleshooting1 Find two ZenWiFi XD4 Plus, and power them on.2 Use a network cable to connect your modem to the WAN port of either ZenWiFi XD4 Plus. ThisZenWiFi XD4 Plus will be the AiMesh router, and the other ZenWiFi XD4 Plus will be the AiMeshnode.3 The LED turns solid blue to indicate that ZenWiFi XD4 Plus is ready for setup.Preparing to set up an AiMesh WiFi systemAiMesh Setup StepsAiMesh routerAiMesh nodeDownload free ASUS Router APP to set up andmanage your router(s).Prepare01 Place your AiMesh router and node in the same room and atleast 1 meter apart during the setup process.AiMesh node02 Keep your AiMesh node powered on and standby for AiMeshsystem settings.Launch ASUS Router APP, and then follow the on-screeninstructions to finish the AiMesh setup.Launching ASUS Router APP03If your AiMesh router cannot find any AiMesh node nearby or synchronizationfails, please check the following and try again.a Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.b Your AiMesh node is powered on.DC Power adapter DC Output: +12V with max 1.5A currentOperating Temperature 0~40oC Storage 0~70oCOperating Humidity 50~90% Storage 20~90%Specifications:LAN portDCIN port WAN/LAN portAt least1 meterAiMesh routerAiMesh node

/ 2

Related manuals for Asus ZenWiFi XD4 Plus