viCare & Cleaning• Before you lift or reposition your monitor, it is better to disconnect thecables and power cord. Follow the correct lifting techniques whenpositioning the monitor. When lifting or carrying the monitor, grasp theedges of the monitor. Do not lift the display by the stand or the cord.• Cleaning. Turn your monitor off and unplug the power cord. Clean themonitor surface with a lint-free, non-abrasive cloth. Stubborn stainsmay be removed with a cloth dampened with mild cleaner.• Avoid using a cleaner containing alcohol or acetone. Use a cleanerintended for use with the LCD. Never spray cleaner directly on thescreen, as it may drip inside the monitor and cause an electric shock.The following symptoms are normal with the monitor:• The screen may flicker during the initial use due to the nature of thefluorescent light. Turn off the Power Switch and turn it on again tomake sure that the flicker disappears.• You may find slightly uneven brightness on the screen depending onthe desktop pattern you use.• When the same image is displayed for hours, an afterimage of theprevious screen may remain after switching the image. The screen willrecover slowly or you can turn off the Power Switch for hours.• When the screen becomes black or flashes, or cannot work anymore,contact your dealer or service center to fix it. Do not repair the screenby yourself!Conventions used in this guideWARNING: Information to prevent injury to yourself when tryingto complete a task.CAUTION: Information to prevent damage to the componentswhen trying to complete a task.IMPORTANT: Information that you MUST follow to complete atask.NOTE: Tips and additional information to aid in completing a task.