Asus SA555-Y User Manual

Also see for SA495-Y: Quick start guide

SA495-Y/SA555-Y396.2.6. Configuration2 menu                 OSD turn offSet the period of time the OSD (on-screen display) menu stays on thescreen.The options are: {0 ~ 120} seconds.*{0} does not disappear automatically.OSD H-positionAdjust the horizontal position of the OSD menu.OSD V-positionAdjust the vertical position of the OSD menu.OSD TransparencyAdjust OSD transparency.• {Off} - Transparency off.• {1-100} - Transparency level 1-100.Information OSDSet the period of time the information OSD is displayed on the upperright corner of the screen. The information OSD will display when inputsignal is changed.The information OSD will remain on the screen with {Off} selection.The options are: {Off, 1 ~ 60} seconds.LogoChoose to enable or disable the picture of Logo when turn on yourdisplay.The options are:{Off} (Default){User}**** If Logo set to USER.User logo does NOT support rotation function.Monitor IDSet the ID number for controlling the display via the RS232Cconnection. Each display must have a unique ID number when multiplesets of this display are connected. Monitor ID number range is between1 to 255.Heat statusThis function allows you to check the thermal status of the display atany time.A temperature-warning message will be shown on the screen if thetemperature reaches 97°C(207°F). All key functions except [ ] keywill then be disabled.Once the temperature reaches 98°C(208°F), the display power will beshut down automatically.Monitor informationShows information about your display, including model number,operating hours and software version.     DP VersionDisplayPort support mode.The options are:{DP 1.1} (Default) : DP 1.1 single stream(clone mode){DP 1.2 SST}: DP 1.2 Single stream(clone mode){DP 1.2 MST}: DP 1.2 Multi-Stream*NOTE:The DP version must be set the same for all daisy chain displays.Window selectionSelect the window for adjusting setting. The selected window will behighlight green border.Window selection will set to Main after power on.The options are:• {Main}(Default), {PIP }• [ ] Hot key for Window selection function.RotationSet the rotation of Main/Sub/OSDAuto Rotate : Off/On Default : OffOSD Rotate : Landscape/Portrait Default : LandscapeImage Rotate:All : Off/On Default : OffMain : Off/On Default : OffSub : Off/On Default : OffAuto Rotate: {Off}, {On} when value is On,automatically detect whetherthe PD rotation, Off is set by OSD.OSD Rotate: {Off}, {On} when value is on, OSD rotate 90 °, Off isrestored.All: {Off}, {On} when value is on, all Window screen rotate 90 °, Off thereference set individual window.

/ 65

This manual is suitable for:

SA495-Y SA555-Y

Asus SA555-Y User Manual

Product

Learn More

Legal