Asus RT-AC51U Configuration Manual

Also see for RT-AC1200G: Quick start guide User guide

Step 2Changing the Default Username and PasswordYour wireless router should turn on. There is an indicator light on the wireless router to indicate it is turnedon. Give the wireless router a few minutes to completely start.You can now connect your computer to the wireless router in one of two different ways. Either you canconnect your computer to one of the yellow ethernet ports on the wireless router using another ethernetcable (not included), or connect your computer wirelessly to the wireless router using the unsecured“ASUS” wireless network the wireless router will automatically create.Important! You won’t have a working internet connection just yet. Only after you successfully completedstep 1 through 3 of this manual will you be able to use the internet.Once you’re connected to the wireless router via one of the two options above, you will have to open thewireless router’s configuration interface. You can do this by opening a browser on your computer andnavigate to the website: http://192.168.1.1.You’ll now be greeted with a website like the one below. Please make up a username and a goodpassword you will use later to login to the wireless router’s configuration interface and enter them. ClickNext to continue.Important! This username and password are only used to login to the configuration interface, and not toconnect to the wireless network you will create in the next step. You don’t have to give these credentials toanyone else.If you need any further help with this step, please consult the product manual that came with your router.