Asus RP-AX58 Quick Start Manual

Placing your RP-AX58Plug your RP-AX58 into a power outlet nearyour router/AP.Check the LEDs and see the LED explanations.METHOD 1Download the ASUS Extender Appand follow the onscreen instructionsMETHOD 2Connect via WPSPress the WPS button on your router/AP.Press the WPS button on yourRP-AX58 for more than two (2)seconds until the LED starts toblink blue.RP-AX58AX3000 Dual-Band WiFi RangeExtenderQuickStart GuideHardware ExplanationsButton ExplanationsRESET BUTTONReset the system to its factorydefault settings.WPS BUTTONLaunch the WPS Wizard.LAN PORTConnect your PC to the LANport with a network cable.BEFORE SETUPSETUP METHODSWE SUGGEST…Set up RP-AX58 as a WiFi range extenderPlug RP-AX58 into a power outlet.2 The LED will start breathing white for 3 seconds while booting up.LAN portLEDWPS buttonreset buttonLED ExplanationsWiFi Range Extender ModeStatus LED BehaviorBooting up Blinking WhiteBooting up complete (not connected toRouter) Solid BlueReset (use a pin to press the resetbutton for 5 seconds) Blinking YellowRescue mode Solid PurpleStarting WPS Blinking BlueConnected to the router with GoodSignal Solid WhiteConnected to the router with WeakSignal Solid YellowNo Signal Solid RedAP mode (with wired connection) Solid WhiteAP mode (without wired connection) Solid RedWait for the LED to flash and turn solid blue,indicating that your RP-AX58 is ready to connectto your existing router/AP.around2 meters3If you would like to connect RP-AX58 to other WiFi networks excluding AiMesh-supported routers, please download theASUS Extender App or set up with the WPS button.1 2011 2• To minimize interference, keep the routers away fromdevices like cordless phones, Bluetooth devices andmicrowave ovens.• We recommend that you place the routers in an open orspacious location.NOTES:AiMesh ModeStatus LED BehaviorBooting up Blinking WhiteBooting up complete (not connected toAiMesh Router) Solid BlueReset (use a pin to press the resetbutton for 5 seconds) Blinking YellowRescue mode Solid PurpleConnecting to the AiMesh Router Blinking BlueConnected to the AiMesh Router withGood Signal Solid WhiteConnected to the AiMesh Router withWeak Signal Solid YellowNo Signal Solid RedEthernet backhaul Solid White1

/ 2

Related manuals for Asus RP-AX58