Menu
Asus PureGo User Manual
                    |
10PureGo User ManualCAUTION!• Ensure to follow the calibration tutorial and calibrate when using your PureGo for thefirst time.• You do not need to calibrate after every use, but we recommend calibrating your PureGoperiodically (once every 1 to 3 months, depending on usage frequency) to ensuredetection accuracy.• We recommend recalibrating when changing usage locations to ensure detectionaccuracy.• There may be slight differences in the water quality of the same area during differenttimes. We recommend calibrating periodically, or calibrating when the PureGo APPreminder appears.CAUTION! To ensure the optical detection chamber is completely immersed in the water,the belt should be below water level when your PureGo is placed into the water.To Calibrate your PureGo:1. Press and hold the Start/Standby button for approximately 1.5 seconds untilthe LED ring lights up blue, then place your PureGo into clean water.2. The LED ring will blink blue duringcalibration. When the calibration process iscompleted, the LED ring becomes a solidblue light. The calibration process shouldtake about 25 seconds.Calibrating your PureGoBelt |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved