Menu
Asus Prime Z270-A Series Bios Manual
Also see for PRIME Z270-A Series: User guideQuick start guide
                                                                        |
54ASUS PRIME Z270-A/AR Series BIOS ManualHAMP Fan ControlThis item allows you to set the HAMP Fan operating mode.[Auto] Detects the type of HAMP Fan installed and automatically switches thecontrol modes.[PWM Mode] Enables the HAMP Fan Control feature in PWM mode for 4-pin HAMPFan.[DC Mode] Enables the HAMP Fan Control feature in DC mode for 3-pin HAMP Fan.[Disabled] Disables the HAMP Fan Control.HAMP Fan Q-Fan SourceThe assigned fan will be controlled according to the selected temperature source.Configuration options: [CPU] [MotherBoard] [PCH] [T_SENSOR1] [EXT_Sensor1][EXT_Sensor2] [EXT_Sensor3] [Multiple Sources]• For EXT_Sensor1-3, connect a Thermistor cable to the EXT_TS1-3 header then placethe other end to the component to get the temperature.• For T_SENSOR1, connect a Thermistor cable to the T_SENSOR header then placethe other end to the component to get the temperature.• For Multiple Sources, select up to three temperature sources and the fan willautomatically change based on the highest temperature.HAMP Fan Step UpThis item allows you to set the value of the HAMP fan step up.Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec][153 sec] [178 sec] [204 sec]HAMP Fan Step DownThis item allows you to set the value of the HAMP fan step down.Configuration options: [0 sec] [12 sec] [25 sec] [51 sec] [76 sec] [102 sec] [127 sec][153 sec] [178 sec] [204 sec]HAMP Fan Speed Low LimitThis item allows you to disable or set the HAMP fan warning speed.Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]HAMP Fan ProfileThis item allows you to set the appropriate performance level of the HAMP Fan.[Standard] Sets to [Standard] to make the chassis fan automatically adjustdepending on the chassis temperature.[Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fanoperation.[Turbo] Sets to [Turbo] to achieve maximum chassis fan speed.[Manual] Sets to [Manual] to assign detailed fan speed control parameters. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved