ASUS PCI-DA2000 Series RAID Controllers Driver Installation 312. RAID Manager & Interface2. RAID ManagerCreating New Drives8 Press [Esc] after selecting the drives and if a fault-tolerant RAID level (1,3 or 5)has been selected, the controller will start parity initialization. A progress indi-cator similar to the one shown below will be displayed. When initialization hasfinished, logical drive creation is complete.9 At this point, the logical drive has been partitioned into a singlepartition covering the entire drive capacity and is inaccessible to the host.10 If different partitioning is desired, go to “Partition Logical Drive”(section 2.4.2.4.) menu to do the partitioning.11 When the Logical Drive is properly partitioned, go to “View and Edit scsi idMap” (section 2.5.) menu to map the Logical Drive Partitions to LUNs.87 % CompleteCreating RAID

Asus PCI-DA2100 User Manual

copyright information

contact information

federal communications commission statement

Chapter 1 Introduction

Chapter 2 Features

Chapter 3 Functional Description

disk mirroring

Drive Failure Management

identifying drives

automatic rebuild and manual rebuild

manual rebuild

Disk Array Parameters

Cache Parameters

Drive-Side SCSI Parameters

disk access delay time

Dynamic Logical Drive Expansion

two modes of dynamic logical drive expansion

Chapter 4 Hardware Installation

Installing DRAM SIMM

Basic Operational Set-Up

Configuration & Termination

scsi bus

Chapter 5 Quick Setup

Chapter 6 Configuring RAID

How Does the RAID Controller Work

Chapter 7 BIOS Configuration Utility

Configuration

Color/Monochrome

Chapter 8 Text RAID Manager User Interface

main menu

viewing the current setting of each function

Viewing and Editing Logical Drives

viewing logical drives and drive members

deleting a partition of a logical drive

assigning a logical drive name

Viewing and Editing SCSI ID Map

viewing and deleting the lun mappings

Viewing and Editing SCSI Drives

scanning a new scsi drive

viewing drive information

adding a local spare drive

adding a global spare drive

Viewing and Editing SCSI Channels

setting a transfer speed

setting a transfer width

Viewing and Editing Configuration Parameters

System Functions

mute beeper

change password

reset controller

Viewing System Information

Chapter 9 Remote Administration

Installing NetWare 3.1x

Installing NetWare 4.0x/4.1/4.11

Installing Driver During WinNT 3.1/3.51 Installation

Installing Driver in Existing WinNT 3.1/3.51 System

Updating Windows NT 3.1/3.51 Device Driver

Installing the Driver During WinNT 4.0 Installation

Installing Driver while Installing WinNT4(DEC Alpha)

Installing the Driver in Existing WinNT4 (DEC Alpha)

Installing Windows 95/98 and the Driver

Installing Driver During OS/2 2.x or 3.0 Installation

Updating PCI-DA2100/2200 OS/2 Device Driver

DA2100/2200 OS/2 Driver Command-Line Options

Driver Installation for SCO OpenServer & UnixWare

Drivers and Utilities for Linux

Making Floppy Diskettes for SlackWare 3.2 Installation

Installing SlackWare Linux

Running the ASUS Text RAID Manager for Linux

Drivers and Utilities for Sun Solaris

Installing x86 Driver & Text RAID Manager

Drivers & Utilities - Solaris 2.5.x/2.6 (SPARC)

Installing SPARC Driver & Text RAID Manager

Configuring RAID in Solaris with Text RAID Manager

specifications

View and Edit Logical Drives

View and Edit Host LUNs

View and Edit SCSI Channels

view system information

Index

about this guide

system description

feature summary

feature highlights

password protection

system requirements

hardware setup

local management

remote management

software setup

basic operations at startup

disk array

setting up security

displaying and hiding the toolbar

PCI-DA2100

Asus PCI-DA2100 User Manual

Product

Learn More

Legal