4-26 Chapter 4: BIOS setup4.5.2 ChipsetThe Chipset menu allows you to change the advanced chipset settings. Select anitem then press to display the sub-menu.Advanced Chipset SettingsWARMING: Setting wrong values in below sections may causesystem to malfunction.North Bridge ConfigurationConfigure North Bridgefeatures.North Bridge Chipset ConfigurationMemory Remap Feature [Enabled]Initiate Graphic Adapter [PEG/PCI]PEG Port Control [Auto]PEG Port Force x1 [Disabled]North Bridge Chipset ConfigurationMemory Remap Feature [Enabled]Allows you to enable or disable the remapping of the overlapped PCImemory above the total physical memory. Enable this option only when youinstall 64-bit operating system. Configuration options: [Disabled] [Enabled]Initiate Graphic Adapter [PEG/PCI]Allows you to decide which graphics controller to use as the primary bootdevice. Configuration options: [PCI/PEG] [PEG/PCI]PEG Port Control [Auto]Configuration options: [Auto] [Disabled]The following item appears only when you set PEG Port Control to [Auto]PEG Port Force x1 [Disabled]Configuration options: [Enabled] [Disabled]Enabled: Allowremapping ofoverlapped PCI memoryabove the totalphysical memory.DISABLE: Do not allowremapping of memory.BIOS SETUP UTILITYAdvancedBIOS SETUP UTILITYAdvanced
