8-6 Chapter 8End a connection• When connected via modem or VPN, tap on the navigation bar,then tap Disconnect.• When connected via cable or cradle, detach your device from the cableor cradle.• When connected via Infrared, move the device away from the othercomputer or device.• When connected via a network (Ethernet) card, remove the card fromyour device.• When connected via a wireless network, switch off the connection.Set up a WAP gatewayTo access WAP sites through Pocket Internet Explorer, configure yourdevice to use a WAP gateway. Use the following steps to create a new setof connections to the Internet with WAP gateway settings.NOTE Some device models do not support the WAP sites viewingfeature.1. Get the following information from your ISP: ISP server phone number,user name, and password. Also, contact your mobile phone serviceprovider and ask for your WAP gateway server name and port number.2. Tap > Settings > Connections tab > Connections.3. Tap Edit my proxy server. If a proxy server has not been set up, tapSet up my proxy server.4. In Programs that automatically connect to the Internet shouldconnect using, tap New and enter a name for the ISP connection.5. On the Proxy Settings tab, select This network connects to theInternet and This network uses a proxy server to connect to theInternet.6. If necessary, in the Proxy server box, enter the proxy server name.7. Tap Advanced > WAP.8. In the Server box, enter the WAP gateway server name. Under Port,enter the port number. The most common WAP port number is 9201.9. Enter any logon credentials required by the WAP gateway server.
