Asus M2N-VM DH User Manual

Also see for M2N-VM DH: Manual

3-23.1 About the setup utilitiesAfter you have installed the WiFi-AP Solo drivers and utilities to your system, youare now ready to setup the WiFi-AP Solo in your network.The WiFi-AP Solo provides two configuration approaches: the setup wizard and thesetup utility. The former scheme provides an easy approach to the most frequentlyused functions while the latter allows configuring all the functions, including theadvanced settings.For normal users, the setup wizard helps to:1. configure the WiFi-AP Solo as an access point, or wireless station.For advanced users, the setup utility helps to:1. configure the WiFi-AP Solo as an access point, or wireless station;2. enable or disable the WiFi-AP Solo; and3. show statistics.Make sure that you have selected the most appropriate configuration for yourwireless network before you proceed. Refer to section 1.4 for details.Make sure you have connected the supplied antenna to the antenna connectoron the motherboard, or the WiFi-AP Solo may not be able to detect otherwireless devices in your environment.