Asus E11379 User Manual

User GuideE11379ASUS Mobile DockFirst Edition / May 2016Charging your deviceEnsure to fully charge your ASUS Mobile Dock before using it inbattery mode for extended periods. Remember that the poweradapter charges your ASUS Mobile Dock as long as it is pluggedinto an AC power source. Be aware that it takes much longer tocharge the ASUS Mobile Dock when it is in use.IMPORTANT! Do not leave the ASUS Mobile Dock connectedto the power supply once it is fully charged. ASUS Mobile Dockis not designed to be left connected to the power supply forextended periods of time.Airplane precautionsContact your airline provider to learn about related in-flightservices that can be used and restrictions that must be followedwhen using your ASUS Mobile Dock in-flight.IMPORTANT! You can send your ASUS Mobile Dock throughx-ray machines (used on items placed on conveyor belts), but donot expose them to magnetic detectors and wands.Safety precautionsThis ASUS Mobile Dock should only be used in environmentswith ambient temperatures between 0°C to 35°C (32°F to 95°F).Long time exposure to extremely high or low temperaturemay quickly deplete and shorten the battery life. To ensure thebattery’s optimal performance, ensure that it is exposed withinthe recommended environment temperature.Using your ASUS Mobile Dock Top viewMicro USB portNOTE: This port is for charging only, not for data transfer.Package contentsNOTE: If any of the items is damaged or missing, contact yourretailer.ASUS Mobile DockASUS Mobile DockUSER GUIDEUser GuideLeft ViewNOTE: The keyboard layout differs by model or region.KeyboardHingePower switch/Bluetooth pairingswitchKeyboard Bluetooth indicatorTwo-color battery indicatorTwo-color battery charge indicatorColor StatusSolid Green Fully ChargedSolid Orange ChargingBlinking Orange Low BatteryLights off Battery modeThe two-color LED provides a visual indication of the battery’scharge status. Refer to the following table for details:Keyboard indicatorColor StatusBlinking Blue1. Power on(lights off after two (2) seconds)2. Pairing successful(lights off after two (2) seconds)The LED provides a visual indication of the pairing status. Referto the following table for details:NOTE: In the event that your device becomes unresponsive tothe pairing procedure after two (2) minutes, release and slidethe Bluetooth pairing switch to the right again.Charging your ASUS Mobile DockTo charge your ASUS Mobile Dock:Connect the micro USB cable to the power adapter.Plug the power adapter into a grounded power outlet.Plug the micro USB connector into your ASUS MobileDock.Charge your ASUS Mobile Dock for two and a half (2.5)hours before using it in battery mode for the firsttime.NOTE: The input voltage of your ASUS Mobile Dock is DC 5.2V,1A, 5W.IMPORTANT!• Use only the power adapter and micro USB cable of ASUSZenPad 10 to charge your ASUS Mobile Dock. Using adifferent power adapter may damage your ASUS MobileDock.• Peel the protective film off from the power adapter and microUSB cable before charging your ASUS Mobile Dock to preventrisk or injury.• Ensure that you plug the power adapter to the correct poweroutlet with the correct input rating. The output voltage of thisadapter is DC 5.2V, 1A.• When using your ASUS Mobile Dock while plugged-in to apower outlet, the grounded power outlet must be near theunit and easily accessible.• Do not use or expose your ASUS Mobile Dock near liquids,rain, or moisture.• Do not use your ASUS Mobile Dock near heating equipmentor in places where there is likelihood of high temperature.• Keep your ASUS Mobile Dock away from sharp objects.• Do not place objects on top of your ASUS Mobile Dock.NOTE:• Charging through the USB port of a computer may takelonger time to complete.• If your computer does not provide enough power forcharging your ASUS Mobile Dock, charge your ASUS MobileDock via the grounded power outlet instead.Pairing your ASUS Mobile DockTo pair ASUS ZenPad 10 with ASUS Mobile Dock:To disconnect the Bluetooth keyboard:1. Slide the switch to OFF to disable the connection of thekeyboard.2. Under Settings in your Tablet, disable the connection ofthe keyboard.To pair your Bluetooth devices with ASUS Mobile Dock:1. Turn on your ASUS Mobile Dock and its Bluetoothfunction by pressing the switch all the way to the rightand hold for five (5) seconds.2. Turn on the Bluetooth feature of your devices.3. Search for the name 1st Pairing ASUS Keyboard underthe list of Bluetooth devices for pairing.NOTE: If the Bluetooth feature of your device is turned on priorto step 1, refresh and search the list of detected devices again.NOTE:• Once paired, there is no need to pair your ASUS ZenPad10 with ASUS Mobile Dock again. Power on your ASUSMobile Dock and the Bluetooth connection is establishedautomatically.• You may also establish the Bluetooth connection by followingthe instruction on next page.You may use your ASUS Mobile Dock to wirelessly connect withyour ASUS ZenPad 10 via Bluetooth pairing.2. Tap the notification tostart pairing.1. Turn on your ASUS MobileDock and its Bluetoothfunction by pressing theswitch all the way to theright and hold for five (5)seconds.

/ 2

Related manuals for Asus E11379