5. Chisel out a 4 mmrecess along themarked lines.6. Insert the deadboltagain and close thedoor, then mark thedoor frame with thelock bolt and the faceplate.WARNING! The cross-shaped opening in the deadbolt shouldbe orientated at the bottom.7. Chisel out a 2 mmrecess for the strikeplate along the markedlines, then drill a hole25.4 mm in diameter,and 26 mm in depth(enough for the lockingbolt).13E12914_DL101_UM_V3.indd 13 5/24/2017 18:00:10