Asus AAM6000PI Instruction Manual

Contents

6NOTE:You may need the Microsoft Windows Operating System installation files (CABfiles) to complete the installation. The CAB files are contained in the Microsoft’s systemCD-ROM. Some systems may have already installed the CAB files to the hard drive, butyou should have the CD-ROM handy just in case.1. The New Hardware Found window willdetect the ADSL modem card as a PCINetwork Controller. Select the Driverfrom disk provided by hardwaremanufacturer option. Click OK.2. Insert the ADSL Driver CD-ROM intoyour systems CD drive.3. The Install From Disk window appears.Click Browse to locate the driver on yourCD-ROM for the protocol supported byyour ADSL provider: 1483w95 or2364w95 or 1577w95 (The example uses“D” as the CD-ROM drive letter. Yourdrive may have a different letter.) Thenclick OK.4. When the Service Option windowappears, click Advanced.5. The Service Options window displaysthe Connection Address and SelectADSL Mode sections. Enter in the VPI,VCI and Framing values supplied byyour ADSL service provider.In the Select ADSL Mode section, selectthe mode(s) recommended by your ADSLservice provider. Click on the mode(s)required and then click OK.NOTE: The service mode type will be one ofthe following:❑ ANSI T1.413 Issue 2❑ ITU G.992.2 Annex A(G.lite)❑ ITU G.992.1 Annex A(G.dmt)RFC 1483RFC 1577RFC 2364