Asus AAEON OMNI-ADP-KIT Series User Manual

Chapter 3 - AMI BIOS Setup 102Modular Touch Panel Solutions OMNI-ADP-KIT SeriesOptions SummaryOS Timer (minute) 3 Optimal Default, Failsafe DefaultTimer count set to Watch Dog Timer for OS loading.Delayed POST (PEI phase) Disabled Optimal Default, Failsafe DefaultEnabledEnabled - Robot holds BIOS from starting POST, right after power on. This allows BIOSPOST to start with stable power or start after system is physically warmed-up.Note: Robot does this before 'Sends watch dog'.Delayed time (second) 10 Optimal Default, Failsafe DefaultPeriod of time for Robot to hold BIOS from POST.Delayed POST (DXE phase) Disabled Optimal Default, Failsafe DefaultEnabledEnabled - Robot holds BIOS before POST completion. This allows BIOS POST to startwith stable power or start after system is physically warmed-Note: Robot does this after 'Sends watch dog before BIOS POST'.Delayed time (second) 10 Optimal Default, Failsafe DefaultPeriod of time for Robot to hold BIOS from POST.Reset system once Disabled Optimal Default, Failsafe DefaultEnabledEnabled - Robot resets system for one time on each boot. This will send a soft or hardreset to onboard devices, thus puts devices to more stable state.Soft or hard reset Soft reset Optimal Default, Failsafe DefaultHard reset"Select reset type robot should send on each boot.