Chapter 4 – Driver Installation 823.5” Subcompact Board GENE-WHU64.1 Driver Download/InstallationDrivers for the GENE-WHU6 can be downloaded from the product page on theAAEON website by following this link:https://www.aaeon.com/en/p/3and-half-inches-subcompact-boards-gene-bt06Download the driver(s) you need and follow the steps below to install them .St ep 1 – Install Chipset Drivers1. Open the St ep 1 – Intel Chipset folder then the W in10 folder2. Run the Set upChipset.exe in the folder3. Follow the instructions4. Drivers will be installed automaticallySt ep 2 – Install Graphics Drivers1. Open the St ep 2 – Intel Graphics folder and select your OS2. Run the ig xpin.exe file in the folder3. Follow the instructions4. Drivers will be installed automaticallySt ep 3 – Install ME Drivers1. Click on the St ep 3 – Intel Management Engine folder and select your OS2. Run the Set upME.exe file in the folder3. Follow the instructions4. Drivers will be installed automatically