6-8Chapter 6: RAID Configuration6.2.3 Resetting disks to Non-RAIDTake caution before you reset a RAID volume hard disk drive to non-RAID. Resetting aRAID volume hard disk drive deletes all internal RAID structure on the drive.To reset a RAID set:1. From the utility main menu, select 3. Reset Disks to Non-RAID and press .2. Press the up/down arrow keys to select the drive(s) or disks of the RAID set you wantto reset, then press . A small triangle before the Port number marks theselected drive. Press when you are done.3. Press in the confirmation window to reset the drive(s) or press to return to theutility main menu.Port Drive Model Serial # Size Status0 ST3300656SS HWAS0000991753TR 279.3GB Member Disk1 ST3300656SS 37VN00009846RAJ1 279.3GB Member DiskSelect the disks that should be reset.Resetting RAID disk will remove its RAID structuresand revert it to a non-RAID disk.[ ]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete[ RESET RAID DATA ]WARNING: Resetting a disk causes all data on the disk to be lost.(This does not apply to Recovery volumes)
