6-6Chapter 6: RAID Configuration6. Use the up/down arrow keys to select the stripe size for the RAID array (for RAID 0,10 and 5 only) then press . The available stripe size values range from 4 KB to128 KB. The following are typical values:RAID 0: 128KBRAID 10: 64KBRAID 5: 64KBWe recommend a lower stripe size for server systems, and a higher stripe size formultimedia computer systems used mainly for audio and video editing.7. In the Capacity field item, key in the RAID volume capacity that you want to use andpress . The default value field indicates the maximum allowed capacity.8. Press to start creating the RAID volume.9. From the following warning message, press to create the RAID volume and returnto the main menu, or press to go back to the CREATE VOLUME menu.WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.Are you sure you want to create this volume? (Y/N):
