Aegis 4KPROIP Series User Manual

Contents

Aegis 4KPROIP Series User Manual Manual pdf 12 page image

4KPROIPUser Manual 11Setting Up 4KPROIP-HardwareOne to OneOne to one means connecting one source directly to one display. This is a simple “plug and play” set upthat does not need a 10 Gigabit Ethernet switch nor a software platform.1. POWER: Plug power of encoder and decoder with 12V/3A adaptor2. HDMI: Connect HDMI from active source, ie. PC or BD that supports HDMI 2.0 4K/HDR to Encoder(HDMI port)Connect HDMI from active display device ie. TV or screen that support HDMI2.0 4K/HDR UHD toDecoder**Recommend use HDIM 2.0 Premium cable for high resolution to reduce compatibility issues**3. CAT.5e: Connect CAT.5e cable from control device (ie.PC) to Encoder (1G LAN port) for transmittingcontrol instructions.4. CAT.6: Connect Ethernet cable either by Fiber or CAT.6A copper between Encoder (Fiber port or10G LAN port) and Decoder(Fiber port or 10G LAN port) .**Both Encoder and Decoder must be the same Fiber or Copper configuration.**5. AUDIO: Connect Audio line from active source to Encoder (Audio In/Out port) that supports PCML/R. Then connect Audio line from Decoder (Audio Out port) to Audio display device for playing outthe sound source.6. USB: In the optional port of USB for KVM feature, plug USB from control device (ie. PC or BD) toEncoder (USB B port) act as a Host.Then plug USB from Decoder (USB A port) to device (ie. keyboard, mouse etc.)7. IR: Plug IR receiver and sensor kits to both Encoder and Decoder for bidirectional IR signal channel**This needs to be equipped with control software **