Chapter 8 Award BIOS Setup 87The options are: Enabled (Default), Disabled.WDT Active When Power ONThis is Advantech's patented watchdog function which can reboot thesystem should the computer hang in the BIOS checkup.The options are: 62 sec (Default), Disabled, 31 sec, 15 sec.Onboard Serial Ports 1 & 2If the serial ports use the onboard I/O controller, you can modify yourserial port parameters.The options for Port 1 are: 3F8/IRQ4 (Default), 2E8/IRQ3, Disabled,2F8/IRQ3, 3E8/IRQ4.The options for Port 2 are: 2F8/IRQ3 (Default), 3E8/IRQ4, 2E8/IRQ3,Disabled, 3F8/IRQ4.IR Address SelectWhen enabled, the infrared receptor is activated.The options are: Disabled (Default), Enabled.Onboard Parallel PortIf the parallel port uses the onboard I/O controller, you can modifyyour parallel port paramaters. When you select "Disabled", the nexttwo setup items will disappear.The options are: 378/IRQ7 (Default), 3BC/IRQ7, 278/IRQ5, Disabled.Parallel Port ModeYou can choose different data transfer modes for your system.The options are: ECP & EPP (Default), SPP, EPP, ECP.ECP Mode Use DMAYou can choose different DMA modes for data transfer.The options are: 3 (Default), 1.Onboard Serial Ports 3 & 4If the serial ports use the onboard I/O controller, you can modify your
