MIC-1816 Startup Manual 1Before installation, please ensure that the following itemshave been included in your shipment:1. 1 x MIC-1816 system2. 1 x Adapter 100 ~ 240 V 60W 12 V WO/PFCDC plug 90°3. 1 x MIC-1816 startup manual4. 1 x User note for MIC-1816If any of these items are missing or damaged, please con-tact your distributor or sales representative immediately.Caution: BATTERIES ARE AT RISK OF EXPLODING IFINCORRECTLY REPLACED. REPLACE ONLY WITHTHE SAME OR EQUIVALENT TYPE RECOMMEND-ED BY THE MANUFACTURER. DISCARD USEDBATTERIES ACCORDING TO THE MANUFAC-TURER’S INSTRUCTIONS.Attention: DANGER D’EXPLOSION SI LA BATTERIE ESTINEXACTEMENT REMPLACÉE. REMPLACEZSEULEMENT AVEC LA MÊME CHOSE OU LE TYPEÉQUIVALENT RECOMMANDÉ PAR LE FABRICANT,JETTENT LES BATTERIES UTILISÉES INSTRUC-TIONS DE S SELON FABRICANT DES’.MIC-1816Intel® Core™ i3-3217UE/Celeron® 1047UEEmbedded Automation ComputerStartup ManualSystem• 3rd generation Intel® Core ™ i processer with QM77chipsetMemory• 4G SODIMM DDR3-1600, 204 pins, 512MX8, 1.35 VGraphics• Intel® HD Graphics 4000, supports DirectX11Serial Ports• 2 x RS-232 from COM1/COM2Ethernet• Interface: 10/100/1000 Mbps• ControllerLAN1: QM77 (MAC) + 82579LM GbE (PHY)LAN2: 82583V Gigabit Ethernet controllerStorage• Internal SSD Bay: 1 x 2.5” SSD bayFront I/O• Display: 1 x VGA/HDMI• USB: 2 x USB 3.0, 2 x USB 2.0Power Requirement• Power Type: DC power jack• Input Voltage: 12 VDCMiscellaneous• Power SwitchOrange: System standbyGreen: System bootMounting Kit (Optional)• Table Mount: 1960077844N001; 130 x 175 mm• DIN Rail Mount: 1960018849T001Environment• Operating Temperature: 0 ~ 50 °C with 0.7m/S air flowand 1 x industrial SSD• Relative Humidity: 95% @ 40 °C (non-condensing)Physical Characteristics• Dimensions (W x H x D): 165 x 130 x 59 mm• Weight: 1.45 kg (3.19 lb)SpecificationsPacking ListFor more information on this and other Advantechproducts, please visit our website athttp://www.advantech.comhttp://www.advantech.com/ProductsFor technical support and service, please visit oursupport website athttp://support.advantech.com.tw/support/default.aspxThis manual is for the MIC-1816 Series Rev. A1.Part No. 2001181611Printed in TaiwanEdition 2September 2017