69 Chapter 66.7.2 HDD Power DownYou can choose to turn the HDD off after one of the time intervals listed,or when the system is in ìsuspendî mode. If the HDD is in a power sav-ing mode, any access to it will wake it up.6.7.3 Suspend ModeEnabling Suspend Mode feature. The commands are ìEnabledî or ìDis-abledî.6.7.4 Video Off OptionThe default is ìSuspend ->offî. When system is suspend, video will turnoff.6.7.5 Video Off ModeSelect Video Off Mode and press ìEnterî, the choice is ìBlank Screenî,ìV/H SYNC+Blankî and ìDPMC Supportî.6.7.6 Modem Use IRQThis determines the IRQ in which the MODEM can use.The choices: 3, 4,5, 7, 9, 10, 11, NA.6.7.7 Soft-Off by PWR-BTTNIf you choose ìInstant-Offî, then pushing the ATX soft power switch but-ton once will switch the system to ìsystem offî power mode. You canchoose ìDelay 4 sec.î If you do, then pushing the button for more than 4seconds will turn off the system, whereas pushing the button momentarily(for less than 4 seconds) will switch the system to ìsuspendî mode.Max. Power Saving Maximum power management., Suspend Mode = 1 min.,and HDD Power Down = 1 min.User Defined(Default)Allows you to set each mode individually. When not dis-abled, each of the ranges are from 1 min. to 1 hr. exceptfor HDD Power Down which ranges from 1 min. to 15 min.and disable.
