PCM-9575 User’s Manual 4• Enhanced IDE interface: Two channels supports up to four EIDEdevices. BIOS auto-detect, PIO Mode 3 or Mode 4, UDMA 33transfer. Primary IDE support up to UDMA 66/100 mode• FDD interface: Supports up to two FDDs• Serial ports: Four serial RS-232 ports, COM1, 3, 4: RS-232, COM2:RS-232/422/485• Parallel port: One parallel port, supports SPP/EPP/ECP mode• Infrared port: Shared with COM2. Transfer rates up to 115Kbps• Keyboard/mouse connector: Supports standard PC/AT keyboard and aPS/2 mouse• Power management: Supports power saving modes including Normal/Standby/Suspend modes. APM 1.2 compliant• Watchdog timer: 62 level timer intervals• USB: Two universal serial bus ports (4 USB port option)• Expansion: One PCI slot and PC/104 plus connector for ISA and PCIcontrol board• Solid State DiskSupports one 50-pin socket for CFC type I/IISupports M-Systems DOC ® 20001.3.2 VGA/LCD Interface• Chipset: VIA Twister chip with integrated Savage4 2D/3D/Video Accelerator• Frame buffer: Supports 8/16/32 MB frame buffer with system memory• Interface: 4X AGP VGA/LCD interface, Support for 9, 12, 15, 18, 24,36 bit TFT and optional 16- or 24-bit DSTN panel• Display mode: CRT Modes: 1280 x 1024@32bpp (60Hz), 1024 x 768@ 32bpp (85 Hz); LCD/Simultaneous Modes: 1280 x 1024 @16bpp(60 Hz), 1024 x 768 @16bpp (60Hz)1.3.3 LVDS: Supports 2 Channel (2 x 18 bit) LVDS interface• Chipset: VIA VT8606T (TwisterT)1.3.4 Audio function• Chipset: VIA 82C686 South Bridge• Audio controller: AC97 Ver. 2.0 compliant interface, MultistreamDirect sound and Direct Sound 3D acceleration• Stereo sound: 8-bit full-duplex• Audio interface: Microphone in, Line in, CD audio in; Line out,Speaker L, Speaker R• Power: Accepts +12 V source for improved audio quality1.3.5 TV-out (optional)• Chipset: VIA VT 1621Supports NTSC, NTSC=EIA (Japan) and PAL TV formats
