User’s ManualiQ965-IGM 5 Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electricaloutlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cablesfor the devices are unplugged before the signal cables are connected. If possible,disconnect all power cables from the existing system before you add a device. Before connecting or removing signal cables from the motherboard, ensure that allpower cables are unplugged. Seek professional assistance before using an adapter or extension cord. Thesedevices could interrupt the grounding circuit. Make sure that your power supply is set to the correct voltage in your area. If you arenot sure about the voltage of the electrical outlet you are using, contact your localpower company. If the power supply is broken, do not try to fix it by yourself. Contact a qualified servicetechnician or your retailer.Operation safety Before installing the motherboard and adding devices on it, carefully read all themanuals that came with the package. Before using the product, make sure all cables are correctly connected and the powercables are not damaged. If you detect any damage, contact your dealer immediately. To avoid short circuits, keep paper clips, screws, and staples away from connectors,slots, sockets and circuitry. Avoid dust, humidity, and temperature extremes. Do not place the product in any areawhere it may become wet. Place the product on a stable surface. If you encounter technical problems with the product, contact a qualified servicetechnician or your retailer.The symbol of the crossed out wheeled bin indicates that the product(electrical and electronic equipment) should not be placed inmunicipal waste. Check local regulations for disposal of electronicproducts.

electrical safety

Before you Proceed

Motherboard Overview

Motherboard Layout

Layout Content List

Central Processing Unit (CPU)

Installing the CPU

Installing the CPU Heatsink and Fan

Uninstalling the CPU Heatsink and Fan

System Memory

Memory Configurations

Installing a DDR2 DIMM

Expansion Slots

Standard Interrupt Assignments

PCI Slots

Jumpers

Keyboard Power (KBPWR)

Connectors

Front Panel Audio Connector (AAPF)

Optical Drive Audio Connector (CD)

CPU & Chassis Fan Connector (CPU_FAN, CHA_FAN, CHA_FAN2)

Chassis Intrusion Connector (CHASSIS)

ATX Power Connector (EATX12V, EATXPWR)

System Panel Connector (F_PANEL)

Floppy Disk Drive Connector (FLOPPY)

Primary IDE Connector (PRI_EIDE)

Power Fan Connector (PWR_FAN)

Serial ATA RAID Connector (SATA_RAID1)

Digital Audio Connector (SPDIF_OUT)

USB 2.0 Connector (USB56, 78, 910)

BIOS Setup Program

Legend Box

BIOS Menu Screen

Standard CMOS Features

Advanced BIOS Features

Advanced Chipset Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

Frequency/Voltage Control

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save and Exit Setup

Exit Without Saving

Advansus iQ965-IGM User Manual

iQ965-IGM

Advansus iQ965-IGM User Manual

Product

Learn More

Legal