Adesso NuScan 4000 Quick Manual

Also see for NuScan 4000: Specification

Adesso NuScan 4000 Quick Manual Manual pdf 1 page image

2INTRODUCTION3REQUIREMENTSWhether it is hard-to-reach barcodes or frequent moving in the workplace, theNuScan 4000 is a barcode scanner designed to simplify your job and be moreproductive. Equipped with a Class II Bluetooth that provides a reliable 30m wirelessdata transfer range and a lightweight structure that is perfect for warehouses, repairshops, factories and other work settings, the scanner’s laser diode scans at a rateof 100 scans per second with precision and ease. The NuScan 4000 comes witha patented cradle that helps extend battery life, giving you enough power to do25, 000 scans before another recharge is necessary.5INSTALLATIONNuScan-4000 040113 V1.0QuickGuideEnglishwww.adesso.com1Bluetooth Wireless Barcode ScannerModel: NuScan 40004NuScan 5000 Quick Start GuideCONTENTSDESCRIPTION66RESET SCANNERSPECIFICATIONS7 8 9Note:If you need to make changes in the configuration of the scanner for specificapplications, a full Programming Guide can be downloaded at:http://www.adesso.com/download/user-manual/NuScan4000.pdfLIMITED WARRANTYADESSO provides one year limited warranty for the quality of all its products in materialsand workmanship.During this period, ADESSO will repair or replace all merchandise, which proved to bedefective. However, ADESSO will not warranty any product which has been subjected toimproper freight Handling, shipping abuse, neglect or unauthorized repair or installation.The warranty also will not cover products installed with Non-ADESSO components andproduct with broken sealed and assembly trace. After replacement of RMA, ADESSOreserves the right to request the total cost of the replacement products with broken sealsor assembly trace.If you discover a defect, Adesso will, at its option, repair or replace the product at nocharge to you, provided you return it during the warranty period with transportationcharges pre-paid to Adesso. You must contact Adesso at support@adesso.com for aReturn Merchandise Authorization number (RMA) prior to returning any product. Foreach product returned for warranty service, please include your name, shipping address(no P.O. Box), telephone number, copy of the bill of sale as proof of purchase and havethe package clearly marked with your RMA number.SUPPORTWe have listed most of our FAQ’s (Frequently Asked Questions) at:http://www.adesso.com/faqs.asp. Please visit our FAQ Service & Support pages beforeyou contact our E-mail or Telephone Support.Email Support: If our FAQ’s do not help you resolve your issues, please emailsupport@adesso.comTelephone Support:Toll Free: (800) 795-67889:00AM to 5:00PM PST Monday - Friday• Light Source: 650 nm Laser Diode• Depth of Field: up to 400 mm• Scan Rate: 100 scans/ second• Reading Angle: 38°• Communication: Bluetooth 2.1 Compliant• Radio Range: 150 ft (Open Area)• Minimum Bar Width: 4 mil @ Code 39• Print Contrast: >45%• Memory Size: 1 MB (stores up to 65,000 sets EAN13)• Cradle Connection: USB• Operating system: Windows 8, 7, Vista, XP, 2000Mac OS X and above• Connectivity Interface: USB portLEDINDICATORHANDLEPOWER SWITCHSCAN WINDOWBUZZERTRIGGER2.CAUTIONTo avoid damage to the eyes. Do not look directly into the laser beam.WIRELESS OPERATION MODE 1 LED INDICATOR STATUSQuickGuideEnglishwww.adesso.com1Bluetooth Wireless Barcode ScannerModel: NuScan 4000Turn on your computer and let your operating system load com-pletely. Plug in the USB cable to the USB port. Your operatingsystem will detect the device automatically. This device is plug andplay, no driver is required.1.Press down the power switch located on the bottom of scanne.Then, place it onto the cradle to charge it for 7~8 hours at the firsttime use.Orange LED Steady ON Battery fully chargedOrange LED Flash Charging / Low batteryRed LED ON (Once) Barcode not readableRed LED Steady ONGreen LED ON (Once) Good readOrange LED ON (Once) Good read (Data Storage Mode)Offline/ Cradle is not connected to PCWhen the power of battery is too low, the Orange LED will flash with1-beep tone, please charge it immediately before the scanner man-datorily shuts down. When the scanner shuts down, please place itonto the cradle to fully charge and then restart it.3.CradleAfter powering ON scanner, the ORANGE LED will flash with2-beep tones, and the RED LED will be OFF if the scanner andcradle are able to link within the wireless signal range.4. Scan the barcode labeled on the bottom of cradle sequentially if theRED LED is steady on.POWER SWITCH5. The wireless scanner is ready to use now.Start of ConfigurationRESETDemo.Demo. Scan “Start of Configuration” to initiate setting.Scan “RESET” to reset all parameters back todefault vales.Data Transmission ModeWithin 2.4GHz Radio RangeScanner will transmit data to PC/ terminal directly after triggering scanner.Demo%M%A%FBeyond 2.4GHz Radio RangeScanner will save scanning data into the internal memory of scanner if it’s out ofwireless signal. The saved data will be automatically transmitted to PC/ terminalwhile scanner is within wireless range.Scan this barcode to activate Data TransmissionMode. Green/ Orange LED flashes by ending with3-beep tone.Demo%E%R%ANote: We recommend to scan the barcode of “Clean Memory Data" wheninterchanging wireless operation modes to avoid data errors.Clean Memory DataClean up all data stored in memory by scanning thisbarcode. Green/ Orange LED flashes by ending with3-beep tone.WIRELESS OPERATION MODE 2Data Storage ModeScan this barcode to activate Data Storage Mode.Scanner saves all scanning data into the internalmemory of scanner. Green/ Orange LED flashesby ending with 3-beep tone.Demo%M%A%NDemo%E%R%AClean Memory DataClean up all data stored in memory by scanningthis barcode. Green/ Orange LED flashes byending with 3-beep tone.Demo%R%E%CTransmit Memory DataTransmit stored data from memory to PC/ terminalby scanning this barcode. Green/ Orange LEDflashes by ending with 3-beep tone.Note: We recommend to scan the barcode of “Clean Memory Data" wheninterchanging wireless operation modes to avoid data errors.LED Indicator Status Description

/ 1

Related manuals for Adesso NuScan 4000