Adesso Belle Arc Assembly Instruction Manual

Adesso Belle Arc Assembly Instruction Manual Manual pdf 1 page image

4108-22 2.0Assembly Instructions (English) Tel: (212) 736 4440 Fax: (212) 736 4806www.adessohome.comASSEMBLY INSTRUCTION FORBelle Arc LampModel# 4108-22353 West 39th Street, 2nd Floor, New York, NY 100181. Fold the excess cord of thinner arm (C) andinsert it into tube (A) , then tighten the screw (B)2. Remove the plastic bushing (H) from the baseand throw it away.3. Insert tube (A) to base (I) & washer (J), thentighten it with nut (K) using wrench (L).Note: The Arc lamp should face forward inthe same direction as the switch, with thecord coming out of the back of the base.4. Screw bulb (not included) into socket (E).5. Hang shade frame (F) onto wire (D) as shown.6. Insert shade (G) into shade frame (F).GENERAL PRODUCT INFORMATION:This product is suitablefor dry locations only.---------------------------------------------------------------IMPORTANT SAFETY INSTRUCTIONS:This portable lamp has a polarized plug as a featureto reduce the risk of electric shock (one blade islarger than the other). This plug will fit in a polarizedoutlet only one way. If the plug does not fit fully inthe outlet, reverse the plug. If it still does not fit,contact a qualified electrician.Do not use with anextension cord unless the plug can be fully inserted.DO NOT ALTER THE PLUG .----------------------------------------------------BULB TYPE :Use only with three type A 60Wbulbs (not included).PARTS DIAGRAM(3) * shade frame (F) (3)*paper shade(G)

/ 2

Related manuals for Adesso 4108-22