Adaptec RAID 2120S Installation And User Manual

Also see for 2025ZCR - SCSI RAID Storage Controller: Installation guide Installation and user guide Datasheet

Contents

Adaptec RAID 2120S Installation And User Manual Manual pdf 35 page image

2-7Installing the Controller and Drives13 On the next screen, respond as follows:A Creating Array window appears.14 Press Enter to continue with the array configuration.Note: You can start using the array immediately. However,performance is reduced until the build process is complete.15 Press Esc until the Exit Utility window appears.16 Highlight Yes, then press Enter.The system restarts.17 Install the driver as described in Chapter 3.Using the Adaptec Installation CDNote: SCSI only—You cannot create the RAID using a CDdrive connected to the RAID controller.To build a bootable RAID 5 array using the Adaptec installation CD:1 Install the controller and drives, as described in Installing theController and Drives on page 2-3.2 Start or restart the computer.Property Line Displayed Entry or SelectionArray Type Select RAID 5, then press EnterArray Label Type a name, then press Enter.Array Size Press Enter, then press Enter again touse the default granularity of GB.Stripe Size Press Enter.Read Caching Press Enter.Write Caching Press Enter.Create RAID via Press Enter.[Done] Press Enter.