Adaptec PM2865U3 Specifications

Also see for PM2865U3: Install guide

Adaptec PM2865U3 Specifications Manual pdf 1 page image

High Performance Ultra160 SCSI RAID ControllerPM2865U3Century Available with one, two, three or fourUltra160 SCSI ChannelsUp to 160MB/s data transfer rate64-bit, 33MHz PCI host interfaceIntel® i960® RN 80 MIPS I/O processor for high performanceIntegrated hardware RAID 0, 1, 5, 0+1 and 0+5Supports Microsoft® Cluster Server (MSCS)Up to 128MB cache memoryData protection via optional cache battery backupFeatures:• Includes 32MB ECC cache, upgradable to 128MB• Fully I 2 O® compliant• Up to 160MB/s data transfer rate• Controls SCSI-1, SCSI-2 and SCSI-3 devices• Controls Ultra160, Ultra2, Ultra, and Fast SCSI devices• Controls up to 15 SCSI devices per channel• Low Voltage Differential (LVD) technology for up to12 meter SCSI cable length• Integrated hardware RAID 0, 1, 5, 0+1 and 0+5• 2 DIMM sockets support up to 128MB of controllercache memory (DPT or industry-standard 144-pinECC SDRAM SO-DIMMs)• Expansion Modules add 1 or 2 additional Ultra160 SCSI channels• PCI 2.2 compliant• Intel i960 RN I/O processor for ultra-low host CPU utilization• Dedicated SCSI RISC processor for maximumSCSI performance• Audible disk drive failure alarm• Very high-density (VHDCI) external SCSI connectorallows 4 external SCSI channels from 1 slot• Flash-upgradable firmware and BIOS• Supports SAF-TE and SES for storage cabinetstatus monitoring• Supports Microsoft Cluster Server (MSCS)• Dynamic Array Expansion permits drives to be addedon-the-fly to existing arrays• Easy-to-use GUI storage management software• BIOS-based device setup and RAID configuration utility• Command Line Interface (CLI) utility for devicestatus and configuration

/ 2

Related manuals for Adaptec PM2865U3