Appendix F: ICP Serial Controller LED and I2C Connector Reference ● 126● LED Mating Cable Connector: Molex 22-552101 or equivalentJ10:Note: Board circuitry supports COMMON ANODE backplane implementationsICP5085BR I2C Board Connector: There is NO separate I2C connector. I2C signals arecontained within the side band signals of the two SFF-8484 ConnectorsSFF-8484 Connector J5:SFF-8484 Connector J7:J10 Pin Number Signal Description 22-552101Pin Number1 XDEVLED0- PORT 0 Cathode 22 XDEVLED1- PORT 1 Cathode 13 XDEVLED2- PORT 2 Cathode 34 XDEVLED3- PORT 3 Cathode 45 XDEVLED4- PORT 4 Cathode 56 XDEVLED5- PORT 5 Cathode 67 XDEVLED6- PORT 6 Cathode 88 XDEVLED7- PORT 7 Cathode 79 AGGREGATE_L ANY PORT 1010 +3_3V_ACT VCC 9Pin Number Signal Description14 INTA_P14 SB0 - 2W_SCL15 INTA_P15 SB1- 2W_SDA16 GND SB2 - Ground17 GND SB3 - Ground18 INTA_P18 SB4 - Reset19 INTA_P19 SB5 - Backplane AddressPin Number Signal Description14 INTB_P14 SB0 - 2W_SCL15 INTB_P15 SB1- 2W_SDA16 GND SB2 - Ground17 GND SB3 - Ground18 INTB_P18 SB4 - Reset19 INTB_P19 SB5 - Backplane Address
