Adaptec AAA-130SA SERIES Installation And Hardware Manual

Contents

Adaptec AAA-130SA SERIES Installation And Hardware Manual Manual pdf 27 page image

2-13Installing the AAA-13xSA RAID Card and Connecting SCSI PeripheralsInternal Ultra SCSI Connector (50-pin)Use the internal Ultra SCSI connector to connect internal Fast/UltraNarrow SCSI peripherals that have standard 50-pin connectors.Note: To connect internal Fast/Ultra Narrow SCSI periph-erals, a standard 50-pin internal SCSI cable, similar to theone shown in Figure 2-10, is required. (One 50-pin internalSCSI cable is included in Adaptec AAA-13xSA RAID cardkits. The cable allows up to four internal Fast/Ultra Nar-row SCSI peripherals and has a built-in terminator at theend.)Follow these steps to connect your standard internal Fast/UltraNarrow peripherals:1 Locate the 50-pin internal Ultra SCSI cable.Figure 2-10. Connecting Fast/Wide Ultra SCSI PeripheralsConnect to Fast/Ultra Narrow SCSI PeripheralsConnect to AAA-13xSARAID CardTerminator on Cable