Adaptec 4000SAS Installation And User Manual

Also see for 2130SLP - SCSI RAID Controller: Installation guide User guide User guide Installation and user guide Installation and user guide

Contents

Adaptec 4000SAS Installation And User Manual Manual pdf 54 page image

Chapter 7: Installing the Driver and an Operating System ● 547 Complete the Linux installation, following the instructions includedwith your operating system.8 Continue with Managing Your Storage Space on page 60.Installing with NetWareNote: You will need your NetWare installation CD to complete thistask.To install the driver when installing NetWare:1 Restart your computer, then install NetWare. (For instructions, referto your NetWare documentation.)To be able to load additional drivers later, select Manual install modeduring the first part of the installation.To load additional drivers:a Select Modify when the storage adapters are displayed.b Select Storage adapters and press the Insert key to add anunlisted driver from the floppy disk.2 When the Device Types screen appears, check the Storage adapterslist and select Modify to add another driver.3 Select Storage adapters, then press Enter.All recognized controllers are displayed.4 If AACRAID is detected, delete it.5 Press Insert to add another driver.The available drivers are displayed.6 Insert the driver floppy disk.7 Press the Insert key to scan the floppy disk drive.Once the driver is selected, the Parameter screen is displayed.