Adaptec 2025ZCR Installation And User Manual

Also see for 2025ZCR - SCSI RAID Storage Controller: Installation guide Installation and user guide Datasheet

Contents

Adaptec 2025ZCR Installation And User Manual Manual pdf 114 page image

D-9Command Line InterfaceEnabling Automatic FailoverTo enable automatic failover, use the controller setautomatic_failover command with the /failover switch, as inthe following example:AAC0> controller set automatic_failover/failover_enabled=TRUEExecuting: controller set automatic_failover/failover_enabled=TRUEAfter running the controller set automatic_failover command,use the controller show automatic_failover command to verifythat automatic failover has been enabled. If necessary, you can nowreplace a failed disk with a replacement disk.Displaying Controller InformationControllers exhibit a number of attributes that you can display ormanage using the following CLI commands:■ Controller List■ Controller DetailsController ListThe controller list attributes are defined as follows:■ Adapter Name—Name■ Adapter Type—Product name■ Controller Availability—Access modeExampleBefore opening a controller, you may want to use the controllerlist command to display all controllers. In the following example,the Adapter Name column indicates that AAC0 is the name of thecontroller installed on the computer. The example also indicates thecontroller’s path (\\.\).CLI> controller listExecuting: controller listAdapter Name Adapter Type Availability------------ ------------ ------------\\.\AAC0 Adaptec xxxxx read/write