338.6 Menu settings8.6.1 Switch over weighing units (Unit) (only non NTEP appliances)The weighing units are switched on or off via the menu.Activate Function. :Switch-over weighing unit :By pressing the key in the weighing mode it is possible to switch between the activated units.MODEMODEMODEOperationBalance Display• Start balance by pressingAs long as the balance carries out a self test, press .“F1 Unt” is displayed.• PressWeighing unit is switched on or off.• Use to switch weighing unit on or off• Using change to the next unit.
