Acumen FDC 504 User Manual

Acumen FDC 504 User Manual Manual pdf 1 page image

Page 1 of 4INSTALL BATTERIES INTO RECEIVER:INSTALL BATTERIES INTO TRANSMITTER:Replace Batteries At Least Every 6 Months.WARNING: THE REMOTE TRANSMITTER WILL AUTOMATICALLY SWITCH OFF THE FIREPLACEWHEN THE BATTERIES IN THE REMOTE TRANSMITTER ARE LOW.RECEIVER OPERATION:Fireplace Remote Control Operating Instructions For The HomeownerThe Model L Remote Control is designed for use with decorative gas fireplace and wall heaters using aMillivolt gas valve.BEFORE YOU BEGIN:Warning The pilot flame must be lit, with the gas control valve turned to "ON", for the remote to workcorrectly. Read all of the safety precautions in the owner's manual included with yourfireplace before using this remote control.The thermostat is not intended for unattended use.INSTALLING FRESH BATTERIES:Note: It is not necessary to re-set your private code when Installing Fresh Batteries.The fireplace MUST be OFF before replacing transmitter batteries.Acumen Model LAA Alkaline Batteries.Press and ReleasePRESSTO OPENPRESSTO OPENFIREPLACE REMOTEPRESSTO OPENOFFREMOTEBAT.LOWFireplace Controlledby RemoteFireplace Off Fireplace OnLow BatteryIndicatorOFF REMOTE ONBAT.LOWPRESS TO OPENOFF REMOTE ONBAT.LOWPRESS TO OPENOFF REMOTE ONBAT.LOWPRESS TO OPEN