AcuRite 02038W Instruction Manual

Contents

AcuRite 02038W Instruction Manual Manual pdf 7 page image

7Intelli-Time® ClockIntelli-Time products are pre-programmed with the correct time and date.Intelli-Time technology instructs the time and date to set themselves. All youneed to do is select your Time Zone and Daylight Saving Time preferences. Theclock will then automatically set itself and change for Daylight Saving Time.Set the Time, Date & UnitsPress the “ ” button, located on the back of the display unit, to enter SETMODE. Once in set mode, the preference you are currently setting will blink onthe display.To adjust the currently selected (flashing) item, press and release the “ “ or“ “ buttons (press and HOLD to fast adjust).To save your adjustments, press and release the “ ” button again to adjustthe next preference. The preference set order is as follows:TIME ZONE ( PST MST CST EST AST HAST AKST)DST (Daylight Saving Time ON or OFF)CLOCK HOURCLOCK MINUTECALENDAR MONTHCALENDAR DATECALENDAR YEARTEMPERATURE UNITS (ºF or ºC)PRESSURE UNITS (inHg or hPa)You will automatically exit SET MODE if no buttons are pressed for 10 seconds.Enter setup mode at any time by pressing the “ ” button.Display Backlight SettingsThis weather station’s color display features three different lighting settings:High (100%) brightness, Medium (60%) brightness and Low (30%) brightnessUsing battery power alone, the backlight is available momentarily for 10seconds by pressing the “BACKLIGHT” button.When display is powered with the power adapter, backlight remains on at100% brightness. Press “BACKLIGHT” button once to dim to 60% brightness;press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode.AUTO DIM MODE: Automatically adjusts display brightness based on time of day & year.MARCH 11- NOVEMBER 4 6:00 a.m. - 9:00 p.m. = 100% brightness9:01 p.m. - 5:59 a.m.= 30% brightnessNOVEMBER 5 - MARCH 10 7:30 a.m. - 7:00 p.m.= 100% brightness7:01 p.m. - 7:29 a.m. = 30% brightness