40VIII Factory DefaultIf you forget your password, please follow the steps to revert back to default value.• Remove the power and Ethernet cable from your camera• Put one side of electric wire in to “Default”, and the other side of electric wire into “GND”, as the picture below.• Connect the power to the camera. It will take around 30 seconds to boot.• After the camera complete booting, remove the electric wire and plug in theEthernet cable.• Re-login the camera using the default IP (http://192.168.1.200), and user name(admin), password (admin).XI. Package contents• IP Camera Network Camera• Adaptor• CD (Including User manual and IP installation tool)