2 Required information2.1 Indication for useThis medical device is designed to cure photosensitive reconstruction and bonding materials used in dentistry.The target clinical uses relate to conservative and restorative dentistry.This medical device is used with an optical guide and a rigid protection shield.2.2 Operating principleDesigned to light-cure dental materials, the Mini LED is fitted with electroluminescent diodes (LED) that emit avisible blue light in a spectrum of wavelengths between 440 nm - 460 nm. A removable optical guide isattached to the end of the medical device. The optical guide concentrates and directs the light produced to theclinical site.The wavelength of the light source corresponds to that of the photo-initiators used in dental curing materials.2.3 Date of first inclusion of EC marking20072.4 Latest document update01/20152.5 Repairing or modifying the medical deviceContact the supplier of your device. Using the services of an unapproved repairer could render your devicedangerous for you and your patients.Do not repair or modify the device without seeking the prior permission of SATELEC®.If the device is modified or repaired, specific checks and tests must be carried out to ensure that the medicaldevice is still safe to use.In the event of doubt, contact an approved dealer or the SATELEC® customer service team:www.acteongroup.comsatelec@acteongroup.comSATELEC® at the request of technical personnel working for the network of dealers approved bySATELEC®, provides all information required to repair the faulty parts on which they may performrepairs.2.6 WarrantyThe user must not disassemble the base, the battery or the handpiece as this will invalidate the medicaldevice's warranty.2.7 Accessory usage conditionsThe optical guide must be cleaned and sterilised being being used. The rigid protection shield must be cleanedbefore being used.User Manual • Mini LED™ • J02541 • V5 • 07 • 01/2015 • NG13EN010E - Page 7/30