Version 9E1 User’s Manual, Nimbie Chorus NBCH07Tools Menu Item DescriptionIMAGE INFO Display the information of the image file(s) stored onthe hard disk.BACKUP IMAGES Use a selected Client unit to backup all the imagesfrom hard disk to discs.RENAME IMAGE Rename selected image file(s) on the hard disk.DELETE IMAGE Delete selected image file(s) from the hard disk.DISC EMULATE Select an image file and execute disc emulation on allor selected Client units.DISC VERIFY Select an image and execute disc verify on all orselected Client units.ERASE RW DISC Erase rewritable discs on all or selected Client units.CHECK UNITERRORDisplay the last error happened on Client unit.BURN-IN TEST Perform a continuous functional test of autoloaderand drive tray mechanism on all Client units until runout of disc.SETUP Menu OverviewThe Nimbie Chorus Setup Menu mode provides system information andsystem setting functions. The change of setting will take effect immediatelyand will become the default setting. To enter Setup Menu mode, on the MainMenu press the Ø or ×, scroll to SETUP and press ENTER.Setup Menu Item DescriptionSLEEP MODE Enable the system to enter power-saving standbymode after idle for a certain period of time.IGNORE ERROR Ignore source disc error during image extraction ofLOAD IMAGE operation.READ SPEED Set up the drive read speed for the Nimbie Chorussystem.ERROR COUNT Set the maximum number of continuous failure discsallowed. The Client unit will abort its job when the limitis reached.DRIVE INFO Display the information regarding the optical drive inthe Client unit that is connected to the system.HDD INFO Display the information regarding the hard diskstorage capacity.FORMAT HDD Format the hard disk in the Master unit.MASTER VERSION Display the Master unit firmware information.CLIENT VERSION Display the Client unit firmware information.@ 2010, Acronova Technology, Inc. 17