Version 1.3 Operation Manual, Nimbie NB12© 2011, Acronova Technology, Inc. 19O PERATION Q UICK G UIDEAbort a Running OperationTo abort a duplication session, press and hold theTest/Abort button for two seconds. If the recorder iscurrently writing to disc, Nimbie is designed to abort theduplication session after the recorder has completed writingto disc.Important:Turning the power switch to the Off position will immediatelyterminate the active duplication session, damaging any disc in theprocess of being written to. Only turn off the power in case ofemergency.Start a Duplication SessionHigh-Speed Duplication produces more discs per hour, yetNorm-Speed better assures duplicate disc quality especially for audioand video discs.Follow the steps below to start a one-to-multiple disc duplicationsession:1) Load the master disc into the disc loader.2) Load the desired quantity of blank discs ontop of the master into the disc loader.3) Press either the High or Norm-SpeedDuplication button to start. Nimbie will runthe operation until the disc loader is empty.Important:In duplication mode whenever a rewritable disc is detected,Nimbie is designed to always erase the disc. Do not userewritable discs as master discs because the data on the disc willbe erased.Important:To verify your written data, press theFunction Key which will light up its LEDand then press the High or Norm-SpeedDuplication button to start.