Acoustic Research AW880 Installation And Operation Manual

Also see for AW880: Quick setup guide

Contents

Acoustic Research AW880 Installation And Operation Manual Manual pdf 6 page image

4Warning: This product is designed to work with line level outputs or headphoneoutputs only. DO NOT connect it directly to speaker outputs as it will permanentlydamage the transmitter.Connecting to an A/V Receiver1. Connect a “Y” adapter cable (not included)to the 3.5mm mini-plug cable coming out ofthe transmitter.2. Connect the left (white) and right (red)audio plugs on the ”Y” adapter cable to thecorresponding left and right audio outputs ofyour A/V receiver, amp or other audio source.Connecting the Speaker SystemPowering the TransmitterConnect the small, round plug from thetransmitter AC power adapter to thetransmitter’s power input jack. Plug the otherend of the transmitter AC power adapter intoany standard 120V AC wall outlet.TransmitterAC PowerAdapter120V ACwall outletNote: Be sure to use the AC power adapter rated 12V DC 100 mA.Note: There is no transmitter ON/OFF switch. The transmitter is designed to beleft plugged in and powered at all times. If you will not be using the AW880 for anextended period of time, unplug the transmitter AC power adapter.Connecting to an Audio SourceConnecting to an MP3 player, CDplayer, or computerPlug the cable coming out of the transmitterinto the headphone output of your MP3 playeror CD player (or the audio output jack on yourcomputer).TransmitterA/V ReceiverAudio Input Cable“Y” adapter cable(not included)Audio OutputTransmitterAudioInput CableAudiosource