Acorp 4S845AL User Manual

Acorp 4S845AL User Manual Manual pdf 51 page image

1 - 1 11 - 1 11 - 1 11 - 1 11 - 1 1Bhapter 1 BIOS SettpBhapter 1 BIOS SettpBhapter 1 BIOS SettpBhapter 1 BIOS SettpBhapter 1 BIOS SettpOnboard FDC ControllerEnabled (default) Enabled onboard FDCController.Disabled Disabled onboard FDCController.Onboard Serial Port1Select an address and corresponding interrupt for the firstand second serial ports.The Choices: 3F8/IRQ4(default), Auto, (2F8/IRQ3),(3E8/IRQ4), (2E8/IRQ3), Disabled.Onboard Serial Port 2Auto BIOS will automatically setupthe Serial Port 2 address.3F8/IRQ4 Enabled onboard Serial Port 2and address is 3F8.2F8/IRQ3 (default) Enabled onboard Serial Port 2and address is 2F8.3E8/IRQ4 Enabled onboard Serial Port 2and address is 3E8.2E8/IRQ3 Enabled onboard Serial Port 2and address is 2E8.Disabled Disabled.UART Mode SelectThis item allows you to select which Infra Red(IR)function of the onboard I/O chip you wish to use.The Choices: Normal(default), IrDA, SCR, ASKIR.UR2 Duplex ModeThis item allows you to select which Infra Red(IR)function of the onboard I/O chip you wish to use.The Choices: Half (default), Full.ECP Mode Use DMAThe Choices: 3(default), 1.