Menu
Acorn Ltl-5310A ? Ltl-5310MC ?Ltl-5310MG User Manual
                                                          | |
Contents
| 
the work area of the PIR (Passive Infrared) sensor, specifically thesensing angle and distance. To perform the test: First strap the camera on a tree aiming the region ofinterest (ROI). Walk slowly from one side of the ROI to the otherparallel to the camera. Try different distances andangles from the camera. If the Motion Indicator flashes blue, it indicates theposition from where you are detected by one of theside Prep PIR sensors. If the Motion Indicator flashesred, it indicates the position from where you arecaptured by the main PIR sensor.By doing this test, you can find the best placement whenmounting and aiming the Ltl Acorn camera. In general, you arerecommended to place the camera 3 to 6 feet (1 to 2 meters)above the ground.To avoid potential false triggers due to temperature and motiondisturbances, please do not aim the camera at a heat source (i.e.the sun) or nearby tree branches and limbs. The ideal directionto aim at is North or South. Also, remove any limbs close tothe front of the camera.2.5 Enter Live ModeSwitch to the ON position to enter the live mode. The Motion- 12 - |
Related manuals for Acorn Ltl-5310 Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved