Acnodes PC 6170 User Manual

Also see for PC 6170: Specifications

Contents

Acnodes PC 6170 User Manual Manual pdf 71 page image

PC 6170 User’s ManualAppendix BPower Supply SpecificationPower Supply: FSP180-50PLA1 ( 180W, AC110~230V Input)ELECTRICAL REQUIREMENTSOUTPUT ELECTRICAL REQUIREMENTSThe subject power supply will meet all electrical specifications below,over the full operation temperature range and dynamic loadregulation.OUTPUT RATINGOut p ut N o minal R e gu lation R i pp le/ N ois e Min Ma x1 +3.3V ±5% 50mV 0.3A 10.0A2 +5V ±5% 50mV 0.3A 16.0 A3 +12V ±5% 120mV 1.5A 14.0 A4 -12V ±10% 120mV 0.0 A 0.3A5 +5VSB ±5% 50mV 0.0 A 2.0A※ –12V,+3.3V, +5V,+12V will have the regulation to ±10% when allload take off.The +3.3V and +5V total output shall not exceed 61watts. The +3.3V,+5V,and +12V total output shall not exceed 165watts and the totaloutput for this subject power supply is 180 watts. Ripple and noisemeasurements shall be made under all specified load conditionsthrough a single pole low pass filter with 20MHz cutoff frequency.Outputs shall bypassed at the connector with a 0.1uF ceramic diskcapacitor and a 10uF electrolytic capacitor to simulate system loading.Power Supply Specification 63