Ackuretta Sol Hardware Installation Manual

Also see for SOL: Quick start guide User manual Quick start guide Quick start guide

Ackuretta Sol Hardware Installation Manual Manual pdf 1 page image

2023/02Setting Up Wi-FiYou can easily operate your SOL from your computer. You can upload prints directly,and track print status. To set up your Wi-Fi connection:1. Go to Network. The Wi-Fi tab is selected by default.2. Press the Choose a Network button, select a network and key in the password.The IP address appears on screen.3. Make a note of the printer IP Address.4. Select your Wi-Fi network.Updating FirmwareAckuretta is always adding new resins and improving functionality. If you areconnected to the Internet, check for the latest firmware:1. Go to Settings.2. Select Update.3. Press Update firmware online.PrintYou can print either over Wi-Fi or from your USB device.1. Go to Print.2. Select USB or Computer, depending on yourlocation of your file.3. Choose your IBF file.4. Change your material setting, if necessary.5. Press Print.Documentation and SupportFor the full set of DENTIQ documentation, go to:https://ackuretta.com/sol/For community feedback, see our Ackuretta’s User Group on Facebook:https://www.facebook.com/groups/2164055477166718/Quick Start Guidewww.ackuretta.com

/ 2

Related manuals for Ackuretta SOL