LCD Monitor Quick Start Guide - 1EnglishAcer LCD Monitor Quick Start Guide (QSG)Important safety instructionsPlease read the following instructions carefully.1. To clean the LCD monitor screen: Be sure that your monitor is electricallyrated to operate with the AC power available in your location.• Turn off the LCD monitor and unplug the power cord.• Spray a non-solvent cleaning solution onto a rag and clean the screengently.• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THESCREEN OR CASE.• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASEDCLEANERS ON THE LCD DISPLAY SCREEN OR CASE.• Acer will not be liable for damage resulting from use of any ammonia oralcohol-based cleaners.2. Do not place the LCD monitor near a window. Exposing the monitor torain, moisture or sunlight can severely damage it.3. Do not apply pressure to the LCD screen. Excessive pressure may causepermanent damage to the display.4. Do not remove the cover or attempt to service this unit yourself. Anauthorized technician should perform servicing of any nature.5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to140°F). Storing the LCD monitor outside this range may result inpermanent damage.6. Immediately unplug your monitor and call an authorized technician if anyof the following circumstances occur:• Monitor-to-PC signal cable is frayed or damaged.• Liquid spills onto the LCD monitor or the monitor is exposed to rain.• The LCD monitor or case is damaged.